Changing Local And Tool - Epson RC700 Manual

Operation
2. TEACH Mode

2.2.6 Changing Local and Tool

The following describes how to change Local and Tool.
Changing Local number
(1) Press the <Local> key.
(2) Using the numeric keys and arrow keys, input the Local number you want to change.
(3) Press the <OK> key.
TIP

Changing Tool number
(1) Press the < Tool > key.
(2) Using the numeric keys and arrow keys, input the Tool number you want to change.
(3) Press the <OK> key.
TIP

50
It turns to the Local number input mode.
Local: 00
In this example, the number is "15".
Local: 15
The Local number has changed and it returns to the [Direct Teach + Touch Jog]
screen.
When you press the <Cancel> key, it returns to the [Direct Teach + Touch Jog]
screen without saving the change.
It turns to the Tool number input mode.
01 000 FDT T00 R
The Tool number has changed and it returns to the [Direct Teach + Touch Jog]
screen.
When you press the <Cancel> key, it returns to the [Direct Teach + Touch Jog]
screen without saving the change.
L■
RC700 / RC90 option TP2 Rev.11