Changing the jogging amount
(1) Use ▲ / ▼ key to move the cursor to "Distance:".
(2) Use / key to change the jogging amount.
(3) Perform either of the following steps.
RC700 / RC90 option TP2 Rev.11
Distance: Long
The display changes in order of Long → Medium → Short.
The following values are set by default.
XYZ directions [mm]
Long
5.00
Medium
1.00
Short
0.10
Change the jogging amount to desired value:
Use ▲ / ▼ key to move the cursor to the line of "XYZ" or "UVW".
XYZ :
0.10 mm
UVW: 0.10 deg
Use / key and move the cursor to the position to be changed.
Use <Numeric keys> to input numbers.
Update Direct Teach setting:
Press the <OK> key.
Update the Direct Teach settings and return to the [Direct Teach + Touch Jog]
screen.
Do not uprate Direct Teach setting:
Press the <Cancel> key.
Return to the [Direct Teach + Touch Jog] screen without updating the the Direct
Teach settings.
Set other parameters of Direct Teach settings:
Use ▲ / ▼ key to move the cursor to the other parameter.
Operation
UVW directions [deg]
5.00
1.00
0.10
2. TEACH Mode
57