Table of Contents
Advertisement
OPERATION
OPERATION
Know your riding area/tread lightly
Familiarize yourself with all laws and regulations concerning the
operation of this vehicle in your area. Respect the environment in
which you ride your vehicle.
Find out where the designated riding areas are by contacting your
dealer, a local riding club, or local officials. Help keep our trails
open for recreational vehicle use.
Vehicle Break-In Period
Your vehicle's break-in period is the first 25 hours of operation or
the riding mileage which used first two full tanks of gas. Careful
handling of new engine and drive components will improve the
performance and service life of these components. Follow these
steps carefully.
Brake System Break-In Period
In order to achieve the best braking performance, the brake must
be not less than 124mi(200Km) break-In when use.
Heavy or excessive braking when using the new braking system
may damage the brake pad and disc.
Belt Break-In Period
Proper break-in of the clutch and driving belt will ensure longer
service life and better performance. Run the break-in clutch
and belt at low speeds for the recommended break-in time, only
pulling light loads. Avoid violent acceleration and high speed
running during run-in. If the belt is broken, be sure to clean up
the intake and outlet pipeline and any debris from the clutch and
engine compartment during belt replacement.
70
Advertisement
Chapters
Table of Contents
