Code 128 / Ean128; Pdf417; Unknown" Aim Id (An Aim Id Which Is Not Specified Above) - Datalogic magellan 3300HSI Product Reference Manual

I 2 of 5
• Check character must be included in label data.
• Label length including check characters and excluding prefix characters must meet requirements imposed by
the main scanner's fixed or variable label length control for this symbology type.
• Prefix must be an ASCII character ']I1' (other prefixes specify different check character properties which are
not supported).
• Example: ']I10123456789'.

Code 128 / EAN128

• Prefix must be either ASCII characters ']C0', ']C1' or ']C2'.
• Label length excluding prefix character must meet requirements imposed by the main scanner's fixed or vari-
able label length control for this symbology type.
• If EAN-128 Symbology is Enabled and prefix is ']C1', label will be identified as an EAN128 otherwise it is
identified as a Code 128.
• A prefix of ']C0' designates that no function code is present in the 1st or 2nd character position.
• A prefix of ']C2' designates that a function code 1 is present in the 2nd character.
• Example : ']C0Code_128.Test'.

PDF417

• Prefix must be an ASCII characters ']L0'.
• Label length excluding prefix character cannot exceed 300 characters. In addition to this, label length exclud-
ing prefix character must meet requirements imposed by the main scanner's fixed or variable label length con-
trol for this symbology type.
• Example : ']L0pdf_test_label'.

"Unknown" AIM ID (an AIM ID which is not specified above)

If a label is received that does not have an AIM ID as specified above, and the first three label characters qualify as
follows...
• The first character is a ']'
• The second character is a capital or small letter
• The third character is a digit
...then the label type is set to GENERIC_DATA and the "unknown" AIM ID is left-appended to the beginning of
the label data.
198
Magellan TM 3300HSi