Step 7 - Installing Visiset™ Configuration Program - Datalogic MATRIX 450 Reference Manual

1
STEP 7 – INSTALLING VISISET™ CONFIGURATION PROGRAM
™
VisiSet is a Datalogic reader configuration tool providing several important advantages:

Setup Wizard for rapid configuration and new users;

Defined configuration directly stored in the reader;

Communication protocol independent from the physical interface allowing the reader to
be considered as a remote object to be configured and monitored.
To install VisiSet™, turn on the PC that will be used for the configuration, running
Windows: 98/2000, NT 4.0+SP4 or later, XP, Vista or 7, then insert the VisiSet™ Mini-
DVD, wait for the CD to autorun and follow the installation procedure.
This configuration procedure assumes a laptop computer, running VisiSet™, connected to
either the reader's auxiliary serial port (through the CBX) or to the reader's on-board Ethernet
port (previously configured using the programming barcode procedure).
After installing and running the VisiSet™ software program the following window appears:
Set the communication parameters from the "Options" menu. Then select "Connect", the
following window appears:
12
Figure 13 - VisiSet™ Opening Window
Figure 14 - VisiSet™ Main Window After Connection
MATRIX 450™ REFERENCE MANUAL