Checking Led Activity; Ethernet Connector Leds; Figure 24 Rj-45 Leds - Meru Networks AP320 Installation Manual

Checking LED Activity

Access point status LEDs are provided on the Ethernet connector and on the face of
the AP200.

Ethernet Connector LEDs

After the AP200 is connected, the LEDs near the RJ-45 connector should light, as
shown in
Figure 24: RJ-45 LEDs
The green LED on the left blinks if any Ethernet activity is taking place. If there is
no Ethernet activity, the LED is off. The LED on the right is solid green if an Ethernet
link is present. If no Ethernet link is present or connectivity is lost, the LED is off.
© 2008 Meru Networks, Inc.
Figure 24.
Link present
Ethernet activity
Checking LED Activity
Installing the AP200 41