Hide thumbs Also See for AP1014i:

Advertisement

Meru AP1014i

Installation Guide

Copyright © Meru Networks, Inc., 2003–2012. All rights reserved.
Other names and brands may be claimed as the property of others.
March 2012
Document Number: 882-70015 Rev A Ver 4 AP1014i Installation Guide

Advertisement

Table of Contents
loading

Summary of Contents for Meru Networks AP1014i

  • Page 1: Installation Guide

    Meru AP1014i Installation Guide Copyright © Meru Networks, Inc., 2003–2012. All rights reserved. Other names and brands may be claimed as the property of others. March 2012 Document Number: 882-70015 Rev A Ver 4 AP1014i Installation Guide...
  • Page 2 This Limited Product Warranty applies to the original end-user customer of the Meru product which you purchased for your own us e, and not for resale (“P roduct”), from Meru Networks, Inc. (“Meru”) or its authorized reseller (“Reseller”). Limited Warranties One-year limited hardware warranty: Meru warrants to you that Meru —...
  • Page 3 Alteration or modification of the Product in any way, including without — limitation configuration with software or components other than those supplied by Meru or integration with parts other than those supplied by Meru. Abuse, damage or otherwise being subjected to problems caused by —...
  • Page 4 degree of protection equivalent to that of the original packaging, to Meru at the address below. You agree to obtain adequate insurance to cover loss or damage to the Product during shipment. If you obtain an RMA# and return the defective Product as described above, Meru will pay the cost of returning the Product to Meru.
  • Page 5 Meru. All inquiries or claims made under this Limited Product Warranty must be sent to Meru at the following address: Meru Networks Inc., 894 Ross Drive, CA 94087, USA Tel: 408-215-5300 Fax: 408-215-5301 Email: support@merunetworks.com...
  • Page 6: Table Of Contents

    Chapter 1 Installing AP1014i ..... . 1 Safety Precautions ..... . 1 Package Contents .
  • Page 7: About This Guide

    If you have a support contract, you have access for the length of the contract. See this web site for information such as: Meru System Director Release Notes  Knowledge Base (Q&A)  Downloads  Open a ticket or check an existing one  © 2012 Meru Networks, Inc. About This Guide...
  • Page 8: External References

    Identifies critical information about actions that could result in Warning! equipment failure or bodily harm. Contacting Meru You can visit Meru Networks, Inc. on the Internet at this URL: http://www.merunetworks.com Customer Services and Support For assistance, contact Meru Customer Services and Support 24 hours a day at +1-888-637-8952 (+1-888-Meru-WLA(N)) or +1-408-215-5305.
  • Page 9 Meru Networks, Inc. Customer Services and Support provide end users and channel partners with the following: Telephone technical support  Software update support  Spare parts and repair service  RMA Procedures Contact Meru Customer Services and Support for a Return Material Authorization (RMA) for any Meru equipment.
  • Page 10: Installing Ap1014I

    Safety Precautions Chapter 1 Installing AP1014i AP1014i is supported by System Director versions 5.3 and greater . This chapter describes h ow to install and configure an AP1014i. It contains the following sections: Safety Precautions  Package Contents  AP1014i Overview ...
  • Page 11: Ap1014I Overview

    When VPN access is configured in the corporate System Director interface, users can deploy the AP1014i remotely and have a quick and secure wireless connection to the corporate network. Deployments that expect high-user-density or are intended to support voice or video streaming are not recommended for the AP1014i.
  • Page 12: Configuring The Ap1014I

    Installing the AP1014i The AP1014i is designed to be mounted on either a horizontal flat surface (such as a desktop or table) or a vertical surface (such as a wall). Note that if you are wall-mounting the AP, you will need to purchase two screws sep arately.
  • Page 13: Using The Lan Ports

    This is not a supported configuration on the AP1014i. AP1014i LED Codes The AP1014i has a single LED that indicates its status. If you want to change the appearance of the LED, follow these steps: Meru Access Point Installation Guide...
  • Page 14 Monitor > Alarms > Pending Alarms. AP is online and enabled and one or both radios are either scanning or blue/yellow alternating an admin has taken the radio(s) down. © 2012 Meru Networks, Inc. Installing AP1014i 5...
  • Page 15: Cautions And Warnings

    Ci-dessous, vous trouverez les mises en garde utilisées dans ce manuel. Un mensaje de precaución le advierte sobre un posible peligro que pueda dañar el equipo. Las siguientes son precauciones utilizadas en este manual. © 2012 Meru Networks, Inc. Cautions and Warnings 7...
  • Page 16 FCC. No obstante, los puntos de acceso de la serie Meru Access Point de Meru Networks, Inc. deben usarse de tal manera que se mi n imice la posibilidad de contacto para el usuario durante la operación normal.
  • Page 17: Warnings

    Ci-dessous, vous trouverez les avertissements utilisés dans ce manuel. Una advertencia le llama la atención sobre cualquier posible peligro que pueda ocasionar daños personales o la muerte. A continuación se dan las advertencias utilizadas en este manual. © 2012 Meru Networks, Inc. Cautions and Warnings 9...
  • Page 18 Exposición Máxima Permisible conforme a la normativa FCC CFR 47, sección 1.1310, es decir, los límites asignados a la Ex posición Incontrolada/Población Civil. Meru Access Point Installation Guide © 2012 Meru Networks, Inc.
  • Page 19: Regulatory Information

    Use only with Listed I.T.E. equipment. FCC Radiation Exposure Statement The radiated output power of the Meru Networks devices is well below the FCC radio frequency exposure limits. However, the Access Point should be used in such a manner that the potential for human contact during normal operation is Caution! minimized.
  • Page 20: Radio Frequency Interference Requirements

    Any other installation or use may violate FCC Part 15 Note: regulations. Modifications not expressly approved by Meru Networks, Inc. could void your authority to operate the equipment. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
  • Page 21: Canada. Industry Canada (Ic)

    Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d’emission) est installe a l’exterieur, il doit faire l’objet d’une licence. © 2011 Meru Networks, Inc. Regulatory Information 13...
  • Page 22: Europe-Eu Declaration Of Conformity And Restrictions

    Marking by the alert symbol indicates that usage restrictions apply. Marking by the alert symbol indicates that usage restrictions apply. Meru Access Point Installation Guide © 2012 Meru Networks, Inc.
  • Page 23 1999/5/EG. Bij deze verklaart Meru Networks, Inc. dat deze Access Points voldoet aan de essen- tiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC. Par la présente, Meru Networks, Inc. déclare que l’appareil Access Points est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
  • Page 24: Ieee 802.11B/G Restrictions

    Meru Networks, Inc. týmto vyhlasuje, e Access Points splna základné poiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Meru Networks, Inc. tímto prohlašuje, e tento Access Points je ve shode se základními poadavky a dalšími príslušnými ustanoveními smernice 1999/5/ES. Šiuo Meru Networks, Inc. deklaruoja, kad šis Access Points atitinka esminius reikala- vimus ir kitas 1999/5/EB Direktyvos nuostatas.
  • Page 25: Singapore

    Manufacturing Information Singapore Complies with IDA Standards DB102245 Manufacturing Information The AP1014i is built in China. Factory information is provided under NDA and upon request. © 2012 Meru Networks, Inc. Regulatory Information 19...
  • Page 26 Meru Networks, Inc. 894 Ross Drive Sunnyvale, CA 94087 408-215-5300 www.merunetworks.com...

Table of Contents