Installing The Access Points; Selecting A Location; Table 14 Ap150 Installation Tools - Meru Networks AP320 Installation Manual

Installing the Access Points

You need the tools listed in
Table 14: AP150 Installation Tools
Installation Type
Horizontal mounting
Vertical mounting over a wall
stud
Vertical mounting on sheetrock
Horizontal mounting below a
hanging ceiling
Installing the Access Points

Selecting a Location

The AP150 requires a location that meets the following:
Relatively unobstructed access to the stations the AP serves
Power over Ethernet (PoE) connection to the network switch servicing the
controller.
APs can obtain their power from 802.3af standard Power over Ethernet (PoE)-compat-
ible network switch or PoE power injector installed between the switch and the
AP150.
Select a location with minimal physical obstructions between the AP and the wireless
stations. In an office with cubicles, mounting the APs below a hanging ceiling or the
wall near the ceiling provides the least obstructed communications path.
62 Meru Access Point and Radio Switch Installation Guide
Table 14.
Tools Required
None
Drill
1/8"drill bit
Screwdriver
1/8"Allen wrench
Drill
3/16" drill bit
Screwdriver
1/8"Allen wrench
Screwdriver
Wrench or pliers
1/8"Allen wrench
© 2008 Meru Networks, Inc.