Installing The Oap180; Safety Precautions - Meru Networks AP320 Installation Manual

This chapter describes how to physically install the OAP180. It contains the following sec-
tions:

Safety Precautions

Unpacking the OAP180
Installation Requirements
Installing the Access Points
Where to Go From Here
Checking LED Activity
Safety Precautions
IMPORTANT—Read and follow the instructions in Appendix E, "Regulatory Information" on
page 115 before installing and operating this product.
This product is intended to be supplied by a UL Listed power supply, marked Class 2 or
LPS, and rated minimum 5 Vdc, 3A.
Caution!
installed in the plenum space.
© 2008 Meru Networks, Inc.
The OAP180 is not certified for plenum installations, and should not be

Installing the OAP180

Chapter 4
Installing the OAP180 45