Led Activity And Meaning; Changing Led Appearance - Meru Networks AP822 Installation Manual

LED Activity and Meaning

TABLE 4: LED Activity and Meaning
LED COLOR
Status No Color
CYAN
GREEN
GREEN/
WHITE
GREEN/BLUE
BLUE
BLUE
RED/YELLOW
BLUE/YEL-
LOW

Changing LED Appearance

If user wants to change the appearance of the LEDS, follow these steps:
From the controller, click Configuration > Devices > AP, and then select the AP.
1.
Select one of these settings for the LED Mode setting:
2.
•
•
•
Click OK.
3.
LED Lights
STATE
—
ON
Blinking
Alternating
Alternating
Blinking slowly
Blinking rapidly
Alternating
Alternating
Normal: LEDs are as described above
Blink: Sets all LEDs flashing; this is useful to locate an AP
Dark: Turns off all LEDs
No power.
Either there is no power or the LEDs are set to Off on the con-
troller. Check the LED setting on the controller by clicking
Configuration > Devices > AP, selecting the AP and then
checking the setting for LED Mode.
AP starting, stage 1.
AP starting, stage 2.
AP is discovering the controller.
AP is downloading configuration from the controller.
AP is online and enabled.
AP is online and enabled.
Some activity on one or both radios.
AP Failure.
For details, check the controller for alarms by clicking Monitor
> Alarms > Pending Alarms.
AP is online and enabled.
One or both radios are either scanning or an admin has shut-
down the radios.
MEANING
37