Unpacking The Oap180; Installation Requirements; Figure 26 Oap180 Outdoor Access Point - Meru Networks AP320 Installation Manual

Unpacking the OAP180

Unpacking the OAP180
Figure 26: OAP180 Outdoor Access Point
Top panel view
N-Type External
Antenna Connector
(5 GHz)
Confirm that the OAP180 shipping boxes contain the following items:
OAP180 Outdoor Access Point
Wall/Pole Mount Hardware Kit for mounting OAP180 to a 1.5" to 2" diameter steel pole
or tube or as part of a radio or tower structure
N-Type Female connectors for external antennas
Outdoor CAT5 Ethernet cable—100 feet. Be sure to include this (maximum) 100 foot
cable in link path calculation; the PoE does not resend the traffic, it only provides
power.
Power injector with power cord

Installation Requirements

In addition to the hardware supplied by Meru Networks, you need the following:
Required
Standard Ethernet cable to connect the power injector to a switch or controller
Antennas (sold separately)
Ground wire for the OAP180
Optional
RF coaxial cable to connect the antenna to the OAP180
46 Meru Access Point and Radio Switch Installation Guide
2.4G 5G 5G 2.4G
N-Type External
Antenna Connector
(2.4 GHz)
Bottom panel view
Console
Console
Port Cover
Attachment
Console Ethernet/PoE
Port Connector
PoE
Water-Tight
Test Point
© 2008 Meru Networks, Inc.