Table of Contents
Advertisement
To complete AP300 installation, you need the items listed below.
Table 4: AP300 Installation Items
Installation Type
Horizontal mounting
Vertical mounting over a wall stud
Vertical mounting on sheetrock
Horizontal mounting below a
hanging ceiling
Using existing third party brackets
Additional Equipment
A power source is needed to power the AP300. Available options are:
External ACC-AP300-PWR power supply
802.3af compliant PoE device
Draft 802.3at compliant PoE device
You can optionally add a remote antenna mount; see
Ceiling.
© 2008 Meru Networks, Inc.
Consumable Items Required
None
Two #6 x 2" wood screws for a wood stud; or
Two #6 x 1½" metal screws for a metal stud
Mounting bracket
Two #6 x 1" screws
Two #4-6 x 7/8" ribbed plastic wall anchors
Mounting bracket
Two caddy fasteners
Two plastic spacers
Two keps nuts (with attached lock washer)
Mounting bracket
Use included shoulder screws
Install the Optional Remote Antenna Mount on the
Installing the AP300
14
Hide quick links:
Advertisement
Table of Contents
