Checking LED Activity
AP200 Status LEDs
Four status LEDs on the face of the AP200 also light, as shown in
. .
Figure 25: AP200 Status LEDs
The functions of the status LEDs are described in
When the AP200 is first connected to the controller and any time the access point is
rebooted thereafter, the AP initializes with and then is programmed by the
controller. When the AP is first powered up, all LEDs are green. Thereafter, the
Status LED (see
42
Meru Access Point and Radio Switch Installation Guide
Figure
25) color reflects the various operating states
RF2
RF1
STATUS
POWER
Table
11.
Figure
25.
(Table
11).
© 2008 Meru Networks, Inc.