Ap300 Rev B Mounting Bracket Stencil - Meru Networks AP320 Installation Manual

Internal Use Only—Beta Draft

AP300 Rev B Mounting Bracket Stencil

The standard mounting bracket (Revision A) was redesigned in June 2008 and
replaced with a Revision B. This bracket has an extra 3/8th inch clearance from the
wall to provide easier access when securing the AP onto the mounted bracket. The
Revision B bracket also has enhancements for easier mounting compatibility with
existing mounting brackets for various access points such as Meru AP200, Meru AP150,
Proxim AP4000, Cisco 1230 Series Access Point, and Cisco 1240 Series Access Points.
The following page contains the stencil of the AP300 Rev B mounting bracket. This
stencil should be printed to scale and verified against an actual mounting bracket
before punching holes
© 2008 Meru Networks, Inc.
AP300 Rev B Mounting Bracket Stencil
Mounting Bracket Stencils 105