2. Unpack the T-bar hanger kit and unfold the legs of the T-bar hanger.
3. Locate the bracket mounting clip holes on the mounting bracket (see
Figure 47: Box Hanger Mounting Bracket Holes
4. Attach the U-joint of the clip to the T-bar and snap in place (see
.
Figure 48: Attaching the Mounting Bracket to the Box Hanger
© 2008 Meru Networks, Inc.
One hole attaches the bracket perpendicular to the box hanger. The other mounts
the bracket parallel to the box hanger.
Mounting bracket holes
Installing the RS4000
Figure
47).
Figure
48).
Installing the RS4000
85