Check Ap332E Led Activity - Meru Networks AP332 Installation Manual

Check AP332e LED Activity

Check AP332e LED Activity
When AP332e first connects to the controller (and any time the access point is rebooted), the AP
initializes and then is programmed by the controller. When the AP first powers up, the LED is green.
Thereafter, its color indicates its operating status.
Figure 12: AP332e Status LED
LEDs
Status
After the AP332e is connected, check the status of the LED. Its indicator state is described below.
18 Meru Access Point Installation Guide © 2012 Meru Networks, Inc.