Checking Led Activity; Ethernet Connector Leds; Ap200 Status Leds - Meru Networks AP300 Installation Manual

Checking LED Activity

Access point status LEDs are provided on the Ethernet connector and on the face of
the AP200.

Ethernet Connector LEDs

After the AP200 is connected, the LEDs near the RJ-45 connector should light, as
shown in
Figure 25: RJ-45 LEDs
The green LED on the left blinks if any Ethernet activity is taking place. If there is
no Ethernet activity, the LED is off. The LED on the right is solid green if an Ethernet
link is present. If no Ethernet link is present or connectivity is lost, the LED is off.

AP200 Status LEDs

Four status LEDs on the face of the AP200 also light, as shown in
© 2010 Meru Networks, Inc.
Figure 25.
Link present
Ethernet activity
RF2
RF1
STATUS
POWER
Checking LED Activity
Figure 26.
Installing AP200 67