Check Ap832E Led Activity - Meru Networks AP832 Installation Manual

Check AP832e LED Activity

Check AP832e LED Activity
When AP832e first connects to the controller (and any time the access point is rebooted), the AP
initializes and then is programmed by the controller. When the AP first powers up, the LED is green.
Thereafter, its color indicates its operating status.
Figure 9: AP832e Status LED
LEDs
Status
After the AP832e is connected, check the status of the LED. Its indicator state is described below.
xiv Meru Access Point Installation Guide © 2013 Meru Networks, Inc.