Table of Contents
Advertisement
LED Activity and Meaning
TABLE 10: LED Activity and Meaning
LED
COLOR
Status
No Color
CYAN
GREEN
GREEN/
WHITE
GREEN/BLUE
BLUE
BLUE
RED/YELLOW
BLUE/YEL-
LOW
Changing LED Appearance
If user wants to change the appearance of the LEDS, follow these steps:
1.
From the controller, click Configuration > Devices > AP, and then select the AP.
2.
Select one of these settings for the LED Mode setting:
•
Normal: LEDs are as described above
•
Blink: Sets all LEDs flashing; this is useful to locate an AP
•
Dark: Turns off all LEDs
3.
Click OK.
38
STATE
—
No power.
Either there is no power or the LEDs are set to Off on the con-
troller. Check the LED setting on the controller by clicking
Configuration > Devices > AP, selecting the AP and then
checking the setting for LED Mode.
ON
AP starting, stage 1.
Blinking
AP starting, stage 2.
Alternating
AP is discovering the controller.
Alternating
AP is downloading configuration from the controller.
Blinking slowly
AP is online and enabled.
Blinking rapidly
AP is online and enabled.
Some activity on one or both radios.
Alternating
AP Failure.
For details, check the controller for alarms by clicking Monitor
> Alarms > Pending Alarms.
Alternating
AP is online and enabled.
One or both radios are either scanning or an admin has shut-
down the radios.
MEANING
LED Lights
Advertisement
Table of Contents
