Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
Maximum Receive Frame
Size
Click the Apply button to accept the changes made.
Interface Description
This window is used to display the status, administrative status, and description of each port on the Switch.
To view the following window, click System > Interface Description, as shown below:
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 3-9 Jumbo Frame Window
Description
Select the stacking unit ID of the Switch that will be configured here.
Select the appropriate port range used for the configuration here.
Enter the maximum receive frame size value here. This value must be between
64 and 12288 bytes. By default, this value is 1536 bytes.
Figure 3-10 Interface Description Window
14
Advertisement
Table of Contents
