Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
After selecting the Auto Surveillance VLAN Summary tab option, at the top of the page, the following page will be
available.
Figure 5-31 MAC Settings and Surveillance Device (Auto Surveillance VLAN Summary) Window
The fields that can be configured are described below:
Parameter
Unit
Voice VLAN
Voice VLAN Global
This window is used to display and configure the global voice VLAN settings. This is used to enable the global voice
VLAN function and to specify the voice VLAN on the Switch. The Switch has only one voice VLAN.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Global, as shown below:
The fields that can be configured are described below:
Parameter
Voice VLAN State
Voice VLAN ID
Voice VLAN CoS
Aging Time
Description
Select the stacking unit ID of the Switch that will be used in this display here.
Figure 5-32 Voice VLAN Global Window
Description
Select to globally enable or disable the voice VLAN feature here.
Enter the VLAN ID of the voice VLAN here. The VLAN to be specified as the
voice VLAN needs to pre-exist before configuration. The range is from 2 to
4094.
Select the CoS of the voice VLAN here. The range is from 0 to 7. The voice
packets arriving at the voice VLAN enabled port are marked as the CoS
specified here. The remarking of CoS packets allow the voice VLAN traffic to be
distinguished from data traffic in Quality of Service.
Enter the aging time value here. This is used to configure the aging time for
aging out the automatically learned voice device and voice VLAN information.
When the last voice device connected to the port stops sending traffic and the
MAC address of this voice device is aged out from FDB, the voice VLAN aging
119
Advertisement
Table of Contents
