D-Link DGS-3130 Series Web Ui Reference Manual page 473

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Authentication Fail
Trap Name
authenticationFailure
BPDU Protection
Trap Name
esBpduProtectionAttackOccur
esBpduProtectionAttackRecover
CFM
Trap Name
dot1agCfmFaultAlarm
CFM Extension
Trap Name
dCfmAisOccurred
dCfmAisCleared
dCfmLockOccurred
Description
An authenticationFailure trap signifies that the SNMPv2
entity, acting in an agent role, has received a protocol
message that is not properly authenticated. While all
implementations of the SNMPv2 must be capable of
generating this trap, the snmpEnableAuthenTraps object
indicates whether this trap will be generated.
Description
This trap is sent when the BPDU attack happened on an
interface.
Binding objects:
(1) ifIndex
(2) esBpduProtectionIfCfgMode
This trap is sent when the BPDU attack recovered on an
interface.
Binding objects:
(1) ifIndex
Description
The trap is initiated when a connectivity defect is
detected.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
Description
This trap is initiated when local MEP enters AIS status.
Binding objects:
(1) dCfmEventMdIndex
(2) dCfmEventMaIndex
(3) dCfmEventMepIdentifier
This trap is initiated when local MEP exits AIS status.
Binding objects:
(1) dCfmEventMdIndex
(2) dCfmEventMaIndex
(3) dCfmEventMepIdentifier
This trap is initiated when local MEP enters lock status.
Binding objects:
(1) dCfmEventMdIndex
462
OID
1.3.6.1.6.3.1.1
.5.5
OID
1.3.6.1.4.1.17
1.17.47.0.1
1.3.6.1.4.1.17
1.17.47.0.2
OID
1.3.111.2.802.
1.1.8.0.1
OID
1.3.6.1.4.1.17
1.14.86.0.1
1.3.6.1.4.1.17
1.14.86.0.2
1.3.6.1.4.1.17
1.14.86.0.3