Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Port Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
State
Click the Apply button to accept the changes made.
DHCP Local Relay VLAN
This window is used to display and configure local relay on a VLAN or a group of VLANs.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Local Relay VLAN, as shown
below:
The fields that can be configured are described below:
Parameter
DHCP Local Relay VID List
State
Click the Apply button to accept the changes made.
NOTE: When the state of the DHCP relay port is disabled, the port will not relay or locally relay
received DHCP packets.
Figure 4-524 DHCP Relay Port Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select to enable or disable the DHCP Relay feature on the specified port(s).
Figure 4-535 DHCP Local Relay VLAN Window
Description
Enter the VLAN ID for DHCP local relay. Tick the All VLANs check box to select
all VLANs.
Select this option to enable or disable the DHCP local relay on the specific
VLAN(s).
69
Advertisement
Table of Contents
