Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Sequence No.
Action
Source
Destination
Specify Ethernet Type
Ethernet Type
Ethernet Type Mask
CoS
Inner CoS
VID
Inner VID
Time Range
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
Description
Enter the sequence number of this ACL rule here. The range is from 1 to
65535. If this value is not specified, the system will automatically generate an
ACL rule number for this entry.
Select the action that this rule will take here. Options to choose from are Permit
and Deny.
Select and enter the source MAC address information here. Options to choose
from are Any, Host, MAC, and Wildcard.
When the Any option is selected, any source traffic will be evaluated according
to the conditions of this rule.
When the Host option is selected, enter the source host MAC address here.
When the MAC option is selected, the Wildcard option will also be available.
Enter the source MAC address and wildcard value in the spaces provided.
Select and enter the destination MAC address information here. Options to
choose from are Any, Host, MAC, and Wildcard.
When the Any option is selected, any destination traffic will be evaluated
according to the conditions of this rule.
When the Host option is selected, enter the destination host MAC address
here.
When the MAC option is selected, the Wildcard option will also be available.
Enter the destination MAC address and wildcard value in the spaces provided.
Select the Ethernet type option here. Options to choose from are aarp,
appletalk, decent-iv, etype-6000, etype-8042, lat, lavc-sca, mop-console,
mop-dump, vines-echo, vines-ip, xns-idp, and arp.
Enter the Ethernet type hexadecimal value here. This value must be between
0x600 and 0xFFFF. When the Ethernet type profile is selected, above, the
appropriate hexadecimal value will automatically be entered.
Enter the Ethernet type mask hexadecimal value here. This value must be
between 0x0 and 0xFFFF. When the Ethernet type profile is selected, above,
the appropriate hexadecimal value will automatically be entered.
Select the CoS value that will be used here. The range is from 0 to 7.
• Mask - Enter the CoS mask value here. The range is from 0x0 to 0x7.
After selecting the CoS value, select the inner CoS value that will be used here.
The range is from 0 to 7.
• Mask - Enter the inner CoS mask value here. The range is from 0x0 to
0x7.
Enter the VLAN ID that will be associated with this ACL rule here. The range is
from 1 to 4094.
• Mask - Enter the VLAN ID mask value here. The range is from 0x0 to
0xFFF.
Enter the inner VLAN ID that will be associated with this ACL rule here. The
range is from 1 to 4094.
• Mask - Enter the inner VLAN ID mask value here. The range is from 0x0
to 0xFFF.
Enter the name of the time range profile that will be used in this ACL rule here.
This name can be up to 32 characters long.
288
Advertisement
Table of Contents
