Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Proxy ARP State
Local Proxy ARP State
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
ARP Table
This window is used to display and configure the ARP table settings.
To view the following window, click L3 Features > ARP > ARP Table, as shown below:
The fields that can be configured are described below:
Parameter
Interface VLAN
IP Address
Mask
Hardware Address
Type
Mgmt
Click the Find button to locate a specific entry based on the information entered.
Click the Clear All button to clear all dynamic ARP cache.
Click the Clear button to clear the dynamic ARP cache associated with the specific entry.
Figure 6-4 Proxy ARP Window
Description
Select to enable or disable the Proxy ARP state here.
Select to enable or disable the local Proxy ARP state here. This local Proxy
ARP function allows the Switch to respond to the Proxy ARP, if the source IP
and destination IP are in the same interface.
Figure 6-5 ARP Table Window
Description
Enter the interface VLAN ID used here. This value must be between 1 and
4094.
Select and enter the IP address to display here.
After the IP Address option was selected, enter the mask address for the IP
address here.
Select and enter the MAC address to display here.
Select the Type option here. Options to choose from are All and Dynamic.
Select this option to display the Management port information.
185
Advertisement
Table of Contents
