Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in IPv6 Interface are described below:
Parameter
Interface VLAN
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Show Detail button to view and configure more detailed settings for the IPv6 interface entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following page will be available.
The fields that can be configured are described below:
Parameter
IPv6 MTU
IPv6 State
Click the Back button to discard the changes made and return to the previous page.
Click the Apply button to accept the changes made.
The fields that can be configured for IPv6 Address Autoconfig are described below:
Figure 6-21 IPv6 Interface Window
Description
Enter the VLAN interface ID that will be associated with the IPv6 entry.
Figure 6-32 IPv6 Interface (Detail, IPv6 Interface Settings) Window
Description
Enter the IPv6 MTU value here. The range is from 1280 to 65534 bytes. By
default, this value is 1500 bytes. This parameter is used to configure the MTU
to be advertised in RA messages.
Select to enable or disable the IPv6 interface global state here.
190
Advertisement
Table of Contents
