Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 Virtual Link Settings, as shown
below:
The fields that can be configured in OSPF Virtual Link are described below:
Parameter
Area ID
Router ID
Hello Interval
Dead Interval
Authentication
Password
MD5 Key ID
MD5 Key
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified entry.
Click the Area ID link (0.0.0.1) to view more detailed settings about the entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 6-46 OSPFv2 Virtual Link Settings Window
Description
Select and enter the OSPFv2 area ID here. This can be specified in the IP
address format or in the decimal value format. The decimal range is from 0 to
4294967295. This area will be used to establish the virtual link.
Enter the router ID of the virtual link neighbor here.
Enter the hello packet interval that the router sends on the virtual link here. The
range is from 1 and 65535 seconds.
Select the Default option to use the default value, which is 10 seconds.
Enter the Dead Interval time after which a neighbor is regarded as offline if no
hello packets are received within that time frame here. The range is from 1 and
65535 seconds.
Select the Default option to use the default value, which is 40 seconds.
Select the authentication type used here. Options to choose from are None,
Simple Password, and MD5.
After selecting the Simple Password authentication type, enter the password
to be used here. This password can be up to 8 characters long.
After selecting the MD5 authentication type, enter the MD5 authentication key
ID here. The range is from 1 to 255.
After selecting the MD5 authentication type, enter the MD5 authentication key
here. This key can be up to 16 characters long.
216
Advertisement
Table of Contents
