Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured for Log State are described below:
Parameter
Log State
Click the Apply button to accept the changes made.
The fields that can be configured for Source Interface Settings are described below:
Parameter
Source Interface State
Type
VID
Click the Apply button to accept the changes made.
The fields that can be configured for Buffer Log Settings are described below:
Parameter
Buffer Log State
Figure 3-178 System Log Settings Window
Description
Select the enable or disable the global system log state here.
Description
Select this option to enable or disable the global source interface state.
Select the type of interface that will be used. Options to choose from are
Loopback, Mgmt, and VLAN.
Enter the interface VID used here. For loopback interfaces this ID can be from
1 to 8. For the management (Mgmt) interface this value is always 0. For VLAN
interfaces this value is from 1 to 4094.
Description
Select whether the enable or disable the global buffer log state here. Options to
choose from are Enable, Disabled, and Default. When selecting the Default
option, the global buffer log state will follow the default behavior.
21
Advertisement
Table of Contents
