Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Subtype
Click the Find button to locate a specific entry based on the selection made.
LLDP Basic TLVs Settings
The Type-Length-Value (TLV) field allows specific information to be sent within LLDP packets. This window is used to
configure basic TLV settings. An active LLDP port on the Switch always includes mandatory data in its outbound
advertisements. There are four optional data types that can be configured to exclude one or more of these data types
from outbound LLDP advertisements. The mandatory data type includes four basic types of TLVs: end of LLDPDU
TLV, chassis ID TLV, port ID TLV, and TTL TLV. The mandatory data types cannot be disabled. There are also four
data types which can be optionally selected. These include: Port Description, System Name, System Description and
System Capability.
To view the following window, click L2 Features > LLDP > LLDP Basic TLVs Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
Port Description
System Name
System Description
System Capabilities
Figure 5-756 LLDP Management Address List Window
Description
Select the subtype. Options to choose from are All, IPv4 and IPv6. After
selecting the IPv4 option, enter the IPv4 address in the space provided. After
selecting the IPv6 option, enter the IPv6 address in the space provided.
Figure 5-767 LLDP Basic TLVs Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select this option to enable or disable the Port Description option.
Select this option to enable or disable the System Name option.
Select this option to enable or disable the System Description option.
Select this option to enable or disable the System Capabilities option.
176
Advertisement
Table of Contents
