DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
STP Instance
This window is used to display and configure the STP instance settings.
To view the following window, click L2 Features > STP > STP Instance, as shown below:
The fields that can be configured are described below:
Parameter
Instance Priority
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
MSTP Port Information
This window is used to display and configure the MSTP port information settings.
To view the following window, click L2 Features > STP > MSTP Port Information, as shown below:
The fields that can be configured are described below:
Parameter
Unit
Port
Cost
Figure 5-50 STP Instance Window
Description
After clicking the Edit button, enter the Instance Priority value here. The range
is from 0 to 61440.
Figure 5-501 MSTP Port Information Window
Description
Select the Switch unit that will be used for this display here.
Select the port number that will be cleared here.
After clicking the Edit button, enter the cost value here. This value must be
between 1 and 200000000.
140