Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
The fields that can be configured in Virtual Router Settings are described below:
Parameter
VLAN
VRID
Virtual IP Address
VRRP Authentication
Interface Name
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
The fields that can be configured are described below:
Parameter
Advertisement Interval
Preemption
Priority
Critical IP Address
Description
Enter the VLAN interface ID used here. The range is from 1 to 4094.
Enter the virtual router ID used here. This ID is used to identify the virtual router
in the VRRP group. The range is from 1 to 255.
Enter the IPv4 address for the created virtual router group here.
Select to enable and then enter the plain text authentication password for
VRRP authentication on the interface here. This string can be up to 8
characters long. The authentication is applied to all virtual routers on this
interface. The devices in the same VRRP group must have the same
authentication password.
Enter the interface name used here. This name can be up to 12 characters
long.
Figure 6-90 VRRP Settings (Edit) Window
Description
Enter the advertisement interval value here. This is the time interval between
successive VRRP advertisements by the master router. The range is from 1 to
255 seconds. By default, this value is 1 second.
Select to enable or disable the preemption feature here. This feature is used to
allow a router to take over the master role if it has a better priority than the
current master.
Enter the priority value here. The range is from 1 to 254.
Enter the critical IPv4 address here. If the critical IP is configured on one virtual
router, the virtual router cannot be activated when the critical IP address is
unreachable. One VRRP group can only track one critical IP.
244
Advertisement
Table of Contents
