Ddm Bias Current Threshold Settings - D-Link DGS-3130 Series Web Ui Reference Manual

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
Port
Action
Type
Value
Click the Apply button to accept the changes made.

DDM Bias Current Threshold Settings

This window is used to display and configure the threshold of the bias current for specific ports on the Switch.
To view the following window, click OAM > DDM > DDM Bias Current Threshold Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
Port
Action
Type
Figure 10-29 DDM Voltage Threshold Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the port used for the configuration here.
Select the action that will be taken here. Options to choose from are Add and
Delete.
Select the type of voltage threshold. Options to choose from are Low Alarm,
Low Warning, High Alarm, and High Warning.
Enter the threshold value. This value must be between 0 and 6.55 Volt.
Figure 10-30 DDM Bias Current Threshold Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the port used for the configuration here.
Select the action that will be taken here. Options to choose from are Add and
Delete.
Select the type of bias current threshold. Options to choose from are Low
Alarm, Low Warning, High Alarm, and High Warning.
401