Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
From Port - To Port
VID
Group Address
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
The fields that can be configured in IGMP Snooping Groups Table are described below:
Parameter
VID
Group Address
Detail
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to view all the entries.
IGMP Snooping Mrouter Settings
This window is used to display and configure the IGMP Snooping Mrouter settings.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping
Mrouter Settings, as shown below:
The fields that can be configured in IGMP Snooping Mrouter Settings are described below:
Parameter
VID
Configuration
Description
Select the appropriate port range used for the configuration here.
Click the radio button and enter a VLAN ID of the multicast group. The range is
from 1 to 4094.
Click the radio button and enter an IP multicast group address.
Description
Click the radio button and enter a VLAN ID of the multicast group. The range is
from 1 to 4094.
Click the radio button and enter an IP multicast group address.
Select this option to display the IGMP group detail information.
Figure 5-70 IGMP Snooping Mrouter Settings Window
Description
Enter the VLAN ID used here. The range is from 1 to 4094.
Select the port configuration. Options to choose from are Port, and Forbidden
Port.
• Port - Select to have the configured ports to be static multicast router
ports.
157
Advertisement
Table of Contents
