Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
Entry Limit
Rate Limit
Trusted
Click the Apply button to accept the changes made.
DHCP Snooping VLAN Settings
This window is used to display and configure the DHCP snooping VLAN settings.
To view the following window, click Security > IMPB > IPv4 > DHCPv4 Snooping > DHCP Snooping VLAN
Settings, as shown below:
The fields that can be configured are described below:
Parameter
VID List
Figure 9-40 DHCP Snooping Port Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Enter the entry limit value here. This value must be between 0 and 1024. Tick
the No Limit option to disable the function.
Enter the rate limit value here. This value must be between 1 and 300. Tick the
No Limit option to disable the function.
Select the trusted option here. Options to choose from are No and Yes. Ports
connected to the DHCP server or to other Switches should be configured as
trusted interfaces. The ports connected to DHCP clients should be configured
as untrusted interfaces. DHCP snooping acts as a firewall between untrusted
interfaces and DHCP servers.
Figure 9-41 DHCP Snooping VLAN Settings Window
Description
Enter the VLAN ID list used here.
326
Advertisement
Table of Contents
