Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IPMC
Control Packet CPU Filtering
This window is used to display and configure the IPMC control packet CPU filtering settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IPMC > Control Packet CPU
Filtering, as shown below:
The fields that can be configured in Control Packet CPU Filtering Settings are described below:
Parameter
Unit
From Port - To Port
Packet Type
Action
Click the Apply button to accept the changes made.
The fields that can be configured in Control Packet CPU Filtering Settings are described below:
Figure 6-83 Control Packet CPU Filtering Window
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select the packet type here. Options to choose from are:
DVMRP - Specifies that the CPU will discard DVMRP Layer 3 control
•
packets sent to it.
•
PIM - Specifies that the CPU will discard PIM Layer 3 control packets
sent to it.
IGMP Query - Specifies that the CPU will discard IGMP Query Layer 3
•
control packets sent to it.
OSPF - Specifies that the CPU will discard OSPF Layer 3 control
•
packets sent to it.
RIP - Specifies that the CPU will discard RIP Layer 3 control packets
•
sent to it.
VRRP - Specifies that the CPU will discard VRRP Layer 3 control
•
packets sent to it.
Select the action that will be taken here. Options to choose from are:
Add - Specifies to add a new entry based on the information entered.
•
Delete - Specifies to delete an entry based on the information entered.
•
238
Advertisement
Table of Contents
