Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured for RSPAN VLAN Settings are described below:
Parameter
VID List
Click the Add button to add the VLAN(s) to the configuration.
Click the Delete button to delete the VLAN(s) from the configuration.
The fields that can be configured for Mirror Settings are described below:
Parameter
Session Number
Destination
Source
Figure 11-15 Mirror Settings Window
Description
Enter the VLAN list ID(s) that will be associated with this configuration here.
Description
Select the mirror session number for this entry here. This number is between 1
and 4.
Tick the checkbox, next to the Destination option, to configure the destination
for this port mirror entry.
In the first drop-down menu select the destination type option. Options to
choose from are Port, Remote VLAN, and Replace.
• Port - After selecting this option, select the Switch Unit ID and destination
Port number from the drop-down menus.
• Remote VLAN - After selecting this option, select the Switch Unit ID and
destination Port number from the drop-down menus and enter the VID in
the space provided. The VID must be between 2 and 4094.
• Replace - After selecting this option, enter the ACL Access List name
and VID (VLAN ID) in the spaces provided.
Tick the checkbox, next to the Source option, to configure the source for this
port mirror entry.
In the first drop-down menu select the source type option. Options to choose
from are Port, ACL, VLAN, and Remote VLAN.
• Port - After selecting this option, select the Switch Unit ID, From Port and
To Port numbers from the drop-down menus. Lastly select the Frame
Type option from the last drop-down menu. Options to choose from are
Both, RX, TX, and TX Forwarding. When selecting Both, traffic in both
the incoming and outgoing directions will be mirrored. When selecting RX,
415
Advertisement
Table of Contents
