Table of Contents
Advertisement
Use of the terminal
Before using the terminal, always check if the roll of
paper is present.
Power On Terminal:
Make sure the terminal battery is correctly installed.
Press <Power> button for about 1s until the display is turned on.
Power Off Terminal:
Press and hold <Power> button for more than 2s until the display shows
the following menu.
Press <Power off>.
Battery Low:
If the battery is empty, the terminal will automatically shut off.
Terminal restart:
In the event of abnormal behavior of the terminal, press and hold the
power button for 8 seconds to force the terminal to power off.
Screen saver mode:
To conserve battery power, the screen may be turned off with a short
press of the power button. (approximately 0.5 seconds)
AXIUM DX8000
07/11
Power on/Power off the terminal
9
Banks and Acquirers International Holding SAS
Copyright© 2023 Ingenico –
All rights reserved
Advertisement
Table of Contents
