Security Of Your Terminal; Integration - Ingenico Self/4000 Quick Start Manual

2.2 Security of your terminal

Your device fulfils current applicable PCI PTS security requirements.
Upon receipt of your terminal you should check for signs of tampering
of the equipment. It is strongly advised that these checks are performed
regularly after receipt. You should check, for example : that the keypad is
firmly in place; that there is no evidence of unusual wires that have been
connected to any ports on your terminal or associated equipment, the
keyboard or any other part of your terminal.
Such checks would provide warning of any unauthorised modifications
to your terminal, and other suspicious behaviour of individuals that have
access to your terminal. Your terminal detects any "tampered state". In
this state the terminal will repeatedly flash the message" Alert Irruption!"
and further use of the terminal will not be possible. If you observe
the "Irruption!" message, you should contact the terminal helpdesk
immediately.
You are strongly advised to ensure that privileged access to your
terminal is only granted to staff that have been independently verified
as being trustworthy.
The terminal must never be put in or left at a location where it could be
stolen or replaced by another device.
You are strongly advised to perform regular checks on the chip card
reader.
CAUTION
Positioning of the terminal on check stand must
be in such a way to make cardholder PIN (Personal
Identification Number) spying infeasible.
NEVER ask the customer to divulge their PIN Code.
Customers should be advised to ensure that they are
not being overlooked when entering their PIN Code.

2.3 Integration

See installation guide.
Self/4000 - Quick start
900042344 R11 000 02/0323
Copyright© 2023 Ingenico -
Banks and Acquirers
8
International Holding SAS
All rights reserved