Extra Terminal Functions; Xtra - Ingenico 5100 Operating Manual

SKYZER TECHNOLOGIES

5.3 EXTRA TERMINAL FUNCTIONS

The terminal provides extra terminal functions which are accessible from the
Supervisor menu.
5.3.1

Xtra

Step Terminal Display Description
SUPERVISOR SUPERVISOR
1.0 SUPERVISOR SUPERVISOR
XTRA XTRA INIT INIT
XTRA XTRA INIT INIT
2.0 1 Merchant 1 1 Merchant 1 1 Merchant 1 1 Merchant 1
2 Merchant 2 2 Merchant 2 2 Merchant 2 2 Merchant 2
3 Merchant 3 3 Merchant 3 3 Merchant 3 3 Merchant 3
TERMINAL TERMINAL
3.0 TERMINAL TERMINAL
FUNCTIONS FUNCTIONS
FUNCTIONS FUNCTIONS
NOTE: Upon completion of desired function, terminal will return to idle screen.
Repeat steps 1-3 if required.
Press # Terminal Display
PRESS 0: Print Stored Transaction Totals
PRINTING PRINTING PRINTING PRINTING
PRESS 1: Terminal Restart
RESTART RESTART RESTART RESTART
TERMINAL? TERMINAL? TERMINAL? TERMINAL?
PRESS 2: Display KVC and print Terminal Configuration
PRINTING PRINTING PRINTING PRINTING
PRESS 3: Print EMV or CTL Public Keys
PRINT PRINT
PRINT PRINT
1. EMV PUBLIC KEYS 1. EMV PUBLIC KEYS
1. EMV PUBLIC KEYS 1. EMV PUBLIC KEYS
2. CTL PUBLIC KEYS 2. CTL PUBLIC KEYS
2. CTL PUBLIC KEYS 2. CTL PUBLIC KEYS
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE
Press ENTER until SUPERVISOR menu is shown on the display.
DUPL DUPL
DUPL DUPL
Press CHQ key to select XTRA.
Only applicable with Multi-Merchant setup.
Select the corresponding number on the terminal to select the Merchant followed by
ENTER.
Select desired function from option table listed below by pressing the corresponding
number key to activate chosen option.
Example: To print stored transactions totals, press 0 key
Description
Terminal will display PRINTING and will print a record of all stored transactions
awaiting transmission in the terminal.
Press ENTER to restart the terminal CANCEL to return to idle prompt.
If ENTER key is pressed, terminal will restart and soon return to idle prompt.
Terminal will display KVC and prompt to PRINT CONFIG Y/N.
Press ENTER to print off the terminal configuration report or CLEAR to exit and
return to idle screen.
Press 1 to print off the EMV public keys or 2 to print off the CTL public keys.
PAGE 89 OF 97
Version 1.3