Appendix B 4500 Series Instrument Requirements And Parameters; Electrical And Gas Requirements; Instrument Parameters - AB Sciex 4500 Series System User's Manual

4500 Series Instrument Requirements and
Parameters
This appendix includes electrical and gas requirements and instrument parameters for the 4500
series instruments.

Electrical and Gas Requirements

The following table contains the values for nominal input voltage, input voltage fluctuation,
frequency, maximum input current and maximum input power, where appropriate.
Table B-1 Electrical Requirements
Component
Instrument
Roughing pump (Leybold)
Roughing pump (Varian)
Instrument bench
Computer
Monitor
The following table contains the gas requirements for the 4500 series of instruments.
Table B-2 Gas Requirements
Gas
Gas 1/Gas 2
Curtain Gas™ supply;
CAD gas
Source exhaust

Instrument Parameters

The following table contains generic parameters for the 4500 series of instruments. The first
number under each scan type is the preset value; the range of numbers is the accessible range
for each parameter.
System User Guide
Document Number: D5030863 A
Values
200 to 240 V, ±10% of nominal, 50/60 Hz, 10 A, 1000 VA
200 to 240 V, ±10% of nominal, 50/60 Hz, 4.2 A (50 Hz), 4.7 A
(60 Hz), 2420 VA (50 Hz), 2250 (60 Hz)
200 to 240 V, ±10% of nominal, 50/60 Hz, 1.76 A, 1200 VA
100 to 240 V, ±10% of nominal, 50/60 Hz, 1 A, 240 VA
115/230 V, ±10% of nominal, 50/60 Hz, 6/3 A, 690 VA
100 to 240 V, +6/–10% of nominal, 50/60 Hz, 1.5 A, 360 VA
Description
Zero air
UHP (ultra high purity)
nitrogen (N2)
House air, zero air, or UHP
N2
Requirements
Zero grade air at 100 psi (max.); flow
rate of 22 L/min.
UHP N2 at 60 psi (max.); flow rate of
10 L/min.
House air, zero air, or UHP N2 at
55 psi; flow rate of 8 L/min. Do not
operate below 55 psi.
4500 Series of Instruments
B
125 of 142