AB Sciex 4500 Series System User's Manual page 33

Figure 3-3
5. In the Devices list, select the instrument.
6. Click OK.
7. In the Devices in current profile list, select the instrument.
8. Click Setup Device.
9. Select the features in the Configuration tab and Communication tab as required.
10. Click OK to return to the Create New Hardware Profile dialog.
11. Click Add Device
12. Add and configure each device that is used with the instrument. Refer to
Devices to a Hardware Profile on page
13. In the Create New Hardware Profile dialog, click OK.
14. In the Hardware Configuration Editor, click the hardware profile.
15. Click Activate Profile.
The check mark turns green. If a red x is shown, then there is an issue with the
hardware profile activation. For more information, refer to
Profile Activation.
Tip!
another. Click a hardware profile and then click Activate Profile. The other
profile is deactivated automatically.
16. Click Close.
System User Guide
Document Number: D5030863 A
Available Devices dialog
A hardware profile does not have to be deactivated before activating
Hardware Profiles and Projects
34.
Troubleshooting Hardware
4500 Series of Instruments
Add
33 of 142