AB Sciex 4500 Series System User's Manual page 75

To generate an XIC using a selected range
1. In the Navigation Bar, under Explore, double-click Open Data File.
The Select Sample dialog opens.
2. In the Data Files list, double-click LIT, and then click Reserpine.wiff.
3. Click OK.
4. To select a range inside the pane, click and hold the left mouse button at the start of
the range and then drag the cursor to the stop point and release.
The selection is highlighted in blue.
5. Click Explore > Extract Ions > Use Range.
An XIC of the specified selection opens in a pane below the spectrum pane. The
experiment information at the top of the pane contains the mass range and the
maximum intensity in counts per second.
To generate an XIC using the maximum peak
1. In the Navigation Bar, under Explore, double-click Open Data File.
The Select Sample dialog opens.
2. In the Data Files list, double-click LIT, and then click Reserpine.wiff.
3. Click OK.
4. Select a range.
The selection is highlighted in blue.
5. Click Explore > Extract Ions > Use Maximum.
An XIC of the maximum peak specified selection opens below the spectrum pane.
The experiment information at the top of the pane contains the mass range and the
maximum intensity in counts per second.
To generate an XIC using base peak masses
1. In a BPC, select the peak from which to extract ions.
The selection is highlighted in blue.
2. Click Explore > Extract Ions > Use Base Peak Masses.
An XIC of the specified selection opens below the spectrum pane. The experiment
information at the top of the pane shows the mass range and the maximum intensity
in counts per second.
To extract ions by selecting masses
1. Open a spectrum or chromatogram.
2. Click Explore > Extract Ions > Use Dialog.
System User Guide
Document Number: D5030863 A
Analyzing and Processing Data
4500 Series of Instruments
75 of 142