Generate Bpcs - AB Sciex 4500 Series System User's Manual

Analyzing and Processing Data
Figure 7-1
3. Type the values for each XIC to be created. If a stop value is not typed, then the
range is defined by the start value.
• In the Start field, type the start value (lower value) for the mass range.
• In the Stop field, type the stop value (higher value) for the mass range.
4. Click OK.
An XIC of the selection opens below the chromatogram pane. The experiment
information at the top of the pane includes the masses and the maximum intensity in
counts per second.

Generate BPCs

BPCs can be generated only from single period, single experiment data. For more information
about using the available icons, refer to
1. Select an area within a TIC.
The selection is highlighted in blue.
2. Click Explore > Show > Show Base Peak Chromatogram.
The selections are shown in the Start Time and End Time fields.
4500 Series of Instruments
76 of 142
Extract Ions dialog
Table 7-8 Graph Options on page 81.
System User Guide
Document Number: D5030863 A