Clean The Curtain Plate - AB Sciex 4500 Series System User's Manual

Cleaning and Maintenance
1
Figure D-3 Source drain on the vacuum interface
Item Description
1 Source drain

Clean the Curtain Plate

1. Remove the curtain plate and then place it on a clean, stable surface.
Figure D-4 Interface with curtain plate removed
2. Using wipes and water, clean both sides of the curtain plate.
3. Repeat step 2
4. Using a dampened wipe or small poly swab, clean the aperture.
5. Wait until the curtain plate is dry.
6. Inspect the curtain plate for solvent stains or lint, removing any residue with a clean,
slightly damp lint-free wipe.
4500 Series of Instruments
138 of 142
using the cleaning solution.
System User Guide
Document Number: D5030863 A