Sample Statistics; View The Statistics For Standards And Qcs - AB Sciex 4500 Series System User's Manual

Analyzing and Processing Quantitative Data
Figure 8-13 Calibration Curve Right-Click Menu
Menu
Exclude (Include)
Exclude All Analytes
(Include All Analytes)
Show Peak
Overlay
Active Plot
Legend
Log Scale X Axis*
Log Scale Y Axis*
Delete Pane
Home Graph
* A log scale arranges the data points in a more manageable view so that the effect of all
points can be monitored simultaneously. For this view, select Log Scale Y Axis versus
Log Scale X and not just the log of one axis.

Sample Statistics

Use the Statistics window to view the statistics samples, typically for standards and QCs (quality
controls). The data from each available batch in the Results Table opens in tabular form in the
grid and a row of data is shown for each standard or QC concentration.

View the Statistics for Standards and Qcs

When viewing more than one Results Table, statistical information about the standards and QCs
for additional batches in the Statistics window can be obtained. This allows the user to compare
results between batches and look for trends in the standards or QCs.
1. With a Results Table open, click Tools > Statistics.
2. In the Statistics Metric list, select Concentration.
3. In the Analyte Name field, select an analyte.
4. In the Sample Type field, select Standard.
The results appear.
5. Look at the %CV and Accuracy columns.
The %CV shows the coefficient of variance between the measurements of a single
parameter, for example the area. Accuracy shows how close the plotted point is to
the interperlated value.
4500 Series of Instruments
100 of 142
Function
Right-click the point and then click Exclude to exclude the point
from the curve. Right-click the point and then click Include to
include the dropped point.
Right-click a point and then click Exclude All Analytes to exclude
all the analytes from the curve. Right-click a point and then click
Include All Analytes to include the points.
Click to review an individual peak.
Overlays two graphs.
Determines which plot is active.
Shows the graph legend.
Click to use a log scale for the X axis.
Click to use a log scale for the Y axis.
Deletes the active pane.
Scales the graph to its original size
System User Guide
Document Number: D5030863 A