System Information
4. Click OK.
Figure 2-8
5. Activate the hardware profile.
Plumb the Diverter Valve
The diverter valve should be plumbed for both injector and diverter modes.
Plumb the Diverter Valve in Injector Mode
The diverter valve is a two position, 6 port valve. If you put the valve in Position A
the sample flows through the external loop. When you switch the valve to Position B
(Figure
2-10), the sample is injected.
4500 Series of Instruments
26 of 142
Configuration tab
(Figure
2-9),
System User Guide
Document Number: D5030863 A