Stop Sample Acquisition; Batch And Acquisition Method Editor Tips - AB Sciex 4500 Series System User's Manual

Stop Sample Acquisition

When a sample acquisition is stopped, the current scan finishes before the acquisition is
stopped.
1. In the Queue Manager, click the sample in the queue after the point where
acquisition should stop.
2. In the Navigation Bar, click Acquire.
3. Click Acquire > Stop Sample.
The queue stops after the current scan in the selected sample is complete. The
sample status in the Queue Manager (Local) window changes to Terminated, and all
other samples following in the queue are waiting.
4. To continue processing the batch, click Acquire > Start Sample.

Batch and Acquisition Method Editor Tips

Table 6-1 Tips
To do this...
To change all the values in a column
simultaneously
To change an existing acquisition
method
To apply a previously created
quantitation method
To select more than one well or vial
at a time
System User Guide
Document Number: D5030863 A
...do this
click a column heading and then right-click. From the
menu, use the Auto Increment and Fill Down commands
to change the values in the column.
This also works for multiple cells in the same column.
from the list, select the method and then click Method
Editor. To create a new acquisition method, from the list,
select None and then click Method Editor. Only
experienced users should use this feature.
Do not use this feature if the Use Multiple Methods option
is used.
select the method from the Quantitation menu.
hold down the Shift key and then click the first and last
well or vial in the range.
Batches
4500 Series of Instruments
61 of 142