Create A Standard Query - AB Sciex 4500 Series System User's Manual

Analyzing and Processing Quantitative Data
Note: To create a query at the same time, refer to
Query on page
The Create Quantitation Set - Select Method page opens.
9. Click Choose Existing Method.
10. In the Method list, select PK Data_Mix.qmf.
11. Click Finish.
The Results Table opens.
Tip!
Results Table > Add/Remove Samples.
12. Save the Results Table.

Create a Standard Query

A query and a standard query can be created numerous ways. The following is one example. For
more information about creating queries, refer to the Help.
1. In the Navigation Bar, under Quantitate, double-click Quantitation Wizard.
2. In the Create Quantitation Set - Select Samples page, select samples.
3. Click Next.
4. In the Select Settings & Query page, in the Default Query section, select Create
New Standard Query.
5. Type a query name.
4500 Series of Instruments
88 of 142
88.
To add or remove samples in the Results Table, click Tools >
Create a Standard
System User Guide
Document Number: D5030863 A