AB Sciex 4500 Series System User's Manual page 57

Figure 6-3
5. In the Sample name section, in the Prefix field, type a name for the samples.
6. To a dd incremental numbering to the end of the sample name, select the Sample
number check box.
7. If the Sample number check box is selected, in the Number of digits field, type the
number of digits to include in the sample name.
For example, if 3 is typed, the sample names would be samplename001,
samplename002, samplename003.
8. In the Data file section, in the Prefix field, type a name for the data file that will store
the sample information.
9. Select the Set name check box to use the set name as part of the data file name.
10. Select the Auto Increment check box to increment the data file names
automatically.
Note: The data for each sample can be stored in the same or separate
data file. The names of the data file will have numerical suffixes starting
from 1.
11. In the Sub Folder field, type a name.
The folder is stored in the Data folder for the current project. If the Sub folder field is
left blank, the data file is stored in the Data folder and a subfolder is not created.
12. In the New samples section, in the Number field, type the number of new samples.
13. Click OK.
The sample table fills with the sample names and data file names.
System User Guide
Document Number: D5030863 A
Add Sample dialog
Batches
4500 Series of Instruments
57 of 142