How To Edit Positioning Data; Inputting Positioning Data - Panasonic FP2-PP2T Technical Manual

7.11 How to Edit Positioning Data

7.11.1 Inputting Positioning Data

The cursor on the positioning data editing screen can be moved by clicking, double-clicking with the
mouse and with the arrow, Enter and Tab keys.
Move the cursor to the data item.
Using the arrow key enables to move the cursor to the adjacent cell in the direction of the arrow.
Using the mouse enables to move the cursor only by clicking the cell. If the cell you want to specify is not
in the data editing screen, scroll the screen using the scroll bar until you can see the cell.
Input the data item.
Pressing any character input key or double-clicking the mouse on the cell you want to input data enables
to input the data as below.
However, in the column with the combo box as below, the data item can be set only by inputting the
initial character on the keyboard. For example, input [C] directly in the column of the pattern. Then the
data item will be [C: Continuance point]. Also, it is possible to select with the arrow keys after the input is
enable.
Press [Enter] key to determine. Press [ESC] key to cancel.
Click the tab of a sheet to change to the sheet.
When using the keyboard, press [Ctrl]+[Page Up] or [Ctrl]+[Page Down].
7-20